Rainproof Cycling Wireless Speedometer

Product information:

Product information:
Brand:INBIKE
Size:2.8 inch
Model:Wired,Wireless
Waterproof:Yes
Color:Black
Power supply:2030 Battery
Blacklight color:White,Green
Installation location:Handlebar
Application:Bicycle,Tricycle
Features:Backlight,Multifunction,Easy to use,LCD screen,Waterproof

Product features:

1.2.8 inch wide viewing angle
FSTN material,Data can be seen clearly from any angle.
Easy to read LCD display with large screen.
2.Smart chip,Stable performance
The data will not be lost when power is off,Accurate readings
3.Waterproof
IPX6 waterproof,it will not be affected in rainy days
4.Easy to control with mode touch,ideal companion for your bicycle.
5.Backlight
It is clear day or night
6.Multifunction,easy to operate
Press M key to switch
Three interfaces for different functions
7.Available for two bicycls
Press M key for 6 sec to switch between 1 and 2
8.Auto stand-by,auto wake-up
Identify of bicycle movement automaticly,
Power-saving(need to touch the key if wireless type)
9.Lasting endurance
Low power comsumption
10.Extension mount design
Easy to read,More scientific per spective for riding
11.Portable
Durable and convenient.
12.Time display function
Also can be used as a wonderful gadget for traveling.

2.8 inch wide viewing angle

FSTN material,Data can be seen clearly from any angle.

Compare size with band card

2.8 inch HD screen, easy to read data

Smart chip,Stable performance

The data will not be lost when power is off,Accurate readings

Waterproof

IPX6 waterproof,it will not be affected in rainy days

Built in waterproof rubber ring for battery,it can effectively prevent water from seeping in

Note:Do not immerse this product in water for a long time so as to ensure the long service!

Backlight function

It is clear both at day and night

Press the left and right botton to trigger or turn off the continuous backlight.
Press any button for 4-second backlight.

Powerful function, easy to operate

Press “M” button to switch three interfaces. Lots of functions.

A/B data record

Can be used in two bikes at same time. Press M button for 6 seconds to switch.

Automatic standby mode and wake automatically

Identify the bike movement automatically and save electricity. (As for wireless version, you need to press button to wake it.)
When no movement, it will be in standby mode automatically to save electricity.

Long battery endurance

only need one 2033 battery

Upgraded Version（Two methods of use）

The upgraded version comes with a free base.
The upgraded version can be used with an extension mount or it can be directly mounted on the handlebar using the base.

Extension mount

easy for you read data (only extension mount version has extension mount)

Product configuration

Wired standard

wired launcher and base*1
computer*1
magnet*1
nylon belts*6
sponge pad*2
2032 battery*1
user’s manual*1

Wireless standard

wireless launcher and base*1
computer*1
magnet*1
nylon belts*6
sponge pad*2
2032 battery*1
user’s manual*1

Wired extension mount

wired launcher and base*1
wired extension mount*1
computer*1(inner with battery)
magnet*1
nylon belts*6
sponge pad*2
user’s manual*1

Wireless extension mount

wireless base*1
wireless launcher*1
wireless extension mount*1
computer*1(inner with battery)
nylon belts*6
magnet*1
sponge pad*2
user’s manual*1

Magnet and launcher installation

Two types are different. Please pay attention.

Wired bike computer

Magnet is fixed by screw. The distance between magnet and launcher should be 1.5~5mm. The head of magnet should be aligned with the upper or lower ends of the launcher.

Wireless bike computer

1. The distance between wireless launcher and computer should be within 60cm. So that computer can receive the signal and work normally.
2.The distance between magnet and launcher should be within 3mm.
3.The magnet should be placed like this picture.

Extension mount installation

1.Install the extension mount

Unlock the buckle and put the mount on the middle of the handlebar. Adjust angle and screw it tight.(If the handlebar is thin, please put the long rubber spacer.)

2.Install the extension mount

Insert the computer to the extension mount buckle. Push hard to the end. It is finished when you hear sound. (If you don’t install the computer in a right position, there will be no data display.)

Wired bike computer installation

1.Fix the base on the handlebar
2.Install the computer on the base
3.Put the wire down
4.Fix the magnet on the spoke
5.Fix the launcher on the fork (the distance between magnet and launcher should within 3 mm.)
6.Finish the installation and start to use it.

Wireless bike computer installation

1.Fix the base on the handlebar
2.Install the computer on the base
3.Fix the magnet on the spoke. Don’t screw it tight in order to adjust it later
4.Fix the wireless launcher through nylon belt
5.Adjust the distance between magnet and launcher. It should be 3mm. When it is over 3mm, adjust magnet position and screw tight.
6.Finish the installation and start to use it.

Base disassembly instruction

Take off the screws. Change the direction so that you can install horizontally or install vertically.
Fix the computer on the base firmly

Product packaging:

Step 1: Check the quality of the product
Step 2: Pack the product with bubble paper
Step 3: Packaging with express bags
Step 4: affix the buyer’s address and affix “FRAGILE” to protect the package.
(Note: Due to the long transportation time, if there is any problem with the product during transportation, please contact us in time, we will give you the best answer 🙂

Product description:

This item is made of quality material with fine process, it’s lightweight, portable, durable, waterproof, resistant to high and low temperature. The screen is luminous and clearly display the time, average speed, maximum speed, distance, etc. This item is ideal for riding lovers.

Product features:

1. Made of premium material, lightweight, sturdy and durable.
2. Waterproof rubber ring to ensure safe use in rainy days.
3. Displaying time, average speed, maximum speed, distance, etc.
4. Easy installation on your bike and motorbikes.
5. Ideal for riding lovers.

Specification:

Material: Plastic
Power: 1 * 3V Battery (Included)
Size: Approx. 44* 6 *15mm / 1.73 * 0.24 * 0.59 inch
Weight: Approx. 100 g

Package Included:

Wireless bike computer:
1 * Odometer
1 * Wireless Base
1 * Wireless Base Sensor
1 * Magnet
2 * Adhesive Sticker
5 * Straps
1 * USB Cable
1 * User Manual

Wired bike computer:
1 * Odometer
1 * Base
1 * Base Sensor
1 * Magnet
2 * Adhesive Sticker
5 * Straps
1 * USB Cable （length 107cm）
1 * User Manual